Front-End electronics configuration system for CMS

The four LHC experiments at CERN have decided to use a commercial SCADA (Supervisory Control And Data Acquisition) product for the supervision of their DCS (Detector Control System). The selected SCADA, which is therefore used for the CMS DCS, is PVSS II from the company ETM. This SCADA has its own database, which is suitable for storing conventional controls data such as voltages, temperatures and pressures. In addition, calibration data and FE (Front-End) electronics configuration need to be stored. The amount of these data is too large to be stored in the SCADA database [1]. Therefore an external database will be used for managing such data. However, this database should be completely integrated into the SCADA framework, it should be accessible from the SCADA and the SCADA features, e.g. alarming, logging should be benefited from. For prototyping, Oracle 8i was selected as the external database manager. The development of the control system for calibration constants and FE electronics configuration has been done in close collaboration with the CMS tracker group and JCOP (Joint COntrols Project)(1). (1)The four LHC experiments and the CERN IT/CO group has merged their efforts to build the experiments controls systems and set up the JCOP at the end of December, 1997 for this purpose.Comment: 3 pages, 4 figures, Icaleps'01 conference PSN WEDT00

Haze in the Klang Valley of Malaysia

Continuous measurements of dry aerosol light scattering (Bsp) were made at two sites in the Klang Valley of Malaysia between December 1998 and December 2000. In addition 24-h PM2.5 samples were collected on a one-day-in-six cycle and the chemical composition of the aerosol was determined. Periods of excessive haze were defined as 24-h average Bsp values greater than 150 Mm-1 and these occurred on a number of occasions, between May and September 1999, during May 2000, and between July and September 2000. The evidence for smoke being a significant contributor to aerosol during periods of excessive haze is discussed and includes features of the aerosol chemistry, the diurnal cycle of Bsp, and the coincidence of forest fires on Sumatra during the southwest (SW) monsoon period, as well as transport modelling for one week of the southwest Monsoon of 2000. The study highlights that whilst transboundary smoke is a major contributor to poor visibility in the Klang Valley, smoke from fires on Peninsular Malaysia is also a contributor, and at all times, the domestic source of secondary particle production is present

A General Approach to Optomechanical Parametric Instabilities

We present a simple feedback description of parametric instabilities which can be applied to a variety of optical systems. Parametric instabilities are of particular interest to the field of gravitational-wave interferometry where high mechanical quality factors and a large amount of stored optical power have the potential for instability. In our use of Advanced LIGO as an example application, we find that parametric instabilities, if left unaddressed, present a potential threat to the stability of high-power operation

A study on elasto-plastic impact friction

A purpose-built pendulum machine was used to study the oblique impact and the behaviour of the surface layers of a normalized low alloy steel subjected to the impact of hard [alpha]-alumina balls. The effect of relative tangential velocity on impulses, restitution coefficient and impact energy loss, was analysed. The morphology of the impact indentations was characterized and related to the impulses obtained. There was lip formation in the target material with ejection of a small fragile oxidized chip, at a certain critical sliding speed. The impact duration and the impulse ratio have maximum values. These values seem to be related to the critical angle of attack, common in abrasive and erosive ductile processes. The experimental results were compared with some impact models and theories.http://www.sciencedirect.com/science/article/B6V5B-3WRC3G0-4/1/41e4c5269f22928dae6bfa3fb640fd0

A fluorescence in situ staining method for investigating spores and vegetative cells of Clostridia by confocal laser scanning microscopy and structured illuminated microscopy

Non-pathogenic spore-forming Clostridia are of increasing interest due to their application in biogas production and their capability to spoil different food products. The life cycle for Clostridium includes a spore stage that can assist in survival under environmentally stressful conditions, such as extremes of temperature or pH. Due to their size, spores can be investigated by a range of microscopic techniques, many of which involve sample pretreatment. We have developed a quick, simple and non-destructive fluorescent staining procedure that allows a clear differentiation between spores and vegetative cells and effectively stains spores, allowing recovery and tracking in subsequent experiments. Hoechst 34580, Propidium iodide and wheat germ agglutinin WGA 488 were used in combination to stain four strains of Clostridia at different life cycle stages. Staining was conducted without drying the sample, preventing changes induced by dehydration and cells observed by confocal laser scanner microscopy or using a super-resolution microscope equipped with a 3D-structured illumination module. Dual staining with Hoechst/Propidium iodide differentiated spores from vegetative cells, provided information on the viability of cells and was successfully applied to follow spore production induced by heating. Superresolution microscopy of spores probed by Hoechst 34580 also allowed chromatin to be visualised. Direct staining of a cheese specimen using Nile Red and Fast Green allowed in situ observation of spores within the cheese and their position within the cheese matrix. The proposed staining method has broad applicability and can potentially be applied to follow Clostridium spore behaviour in a range of different environments

Non-physiological increase of AV conduction time in sinus disease patients programmed in AAIR-based pacing mode

Purpose The EVOCAVDS trial aimed to quantify the paradoxal atrioventricular (AV) conduction time lengthening in sinus node (SD) patients (pts) paced in AAIR-based pacing mode. Methods SD pts, implanted with dual-chamber pacemaker programmed in AAIR-based pacing mode, were randomized in two arms for a 1-month period: the low atrial pacing (LAP; basic rate at 60 bpm, dual sensor with minimal slope) and the high atrial pacing (HAP; basic rate at 70 bpm, dual sensor with optimized slope, overdrive pacing) arm. At 1 month, crossover was performed for an additional 1-month period. AV conduction time, AV block occurrence and AV conduction time adaptation during exercise were ascertained from device memories at each follow-up. Results Seventy-nine pts participated to the analysis (75 ± 8 years; 32 male; PR = 184 ± 38 ms; bundle branch block n = 12; AF history n = 36; antiarrhythmic treatment n = 53; beta-blockers n = 27; class III/Ic n = 18; both n = 8). The mean AV conduction time was significantly greater during the HAP (275 ± 51 ms) vs. LAP (263 ± 49 ms) period (p < 0.0001). Class III/Ic drugs were the only predictors of this abnormal behaviour. Degree II/III AV blocks occurred in 49 % of pts in the HAP vs. 19 % in the LAP period (p < 0.0001). Fifty-two patients (66 %) presented a lengthening of AV conduction time during exercise. Conclusion AAIR-based pacing in SD pts may induce a significant lengthening of pts’ AV conduction time, including frequent abnormal adaptation of AV conduction time during exercise

FRONT-END ELECTRONICS CONFIGURATION SYSTEM FOR CMS

Abstract The four LHC experiments at CER